Tile fastening
Battens or direct fastening hold every course so tiles stay put in strong wind.
Tile Roofing
Tile Roof Installation Garfield, NJ
A roofer in Garfield can install a clay or concrete tile roof, starting with a check that the framing can carry the weight and finishing with the flashing, ridge and eave details that keep it dry. One call to (551) 348-2856 reaches a nearby tile installer.
Before any tile goes up, the question is whether the house can hold it. Clay and concrete tile weigh far more than shingles, so homes framed for a lighter roof often need a structural review and sometimes added framing. Houses designed for tile already account for that load in their framing.
The tile choice comes next. Fired clay is the long lasting classic, while concrete tile is a sturdy, widely available option whose surface color softens with age. The profile can be flat, low curve or high curve, and each handles water and wind a little differently.
The tile may last generations, but the layers below it decide when the roof leaks. Slope matters too: tile generally needs at least 2.5 in 12, and slopes under 4 in 12 need a double layer of underlayment. Choosing a long lasting underlayment now is what keeps the roof from needing a relay in twenty years.
If the problem goes deeper than it first looked, a Garfield roofer may also recommend tile roof replacement or roof installation.
Looking for Garfield tile roof installation? Call (551) 348-2856 to talk to a local roofer.
Call nowThe process
The tile roof installation process
Each layer of a tile roof has a job, and the order matters.
Plan for the load
Before ordering tile, the load on the rafters or trusses is checked, reinforcement is planned if needed and the permit is filed. Tile is ordered with extra for cuts, hips and future repairs.
Dry in the roof
Decking is checked and fastened, drip edge goes on, and the deck is covered with the chosen underlayment, with self-adhered membrane in valleys and at eaves where ice or wind-driven rain is a concern. The underlayment is the true waterproof layer, so this step deserves the most care.
Set the battens
Horizontal battens give each row of tile something to hang on and set the exposure of every course. Some systems skip battens and fasten tile directly, depending on the profile and the slope.
Flash every penetration
Flashing goes in at valleys, sidewalls, headwalls, skylights and pipes, sized for the deep profile of tile. Tile flashing has to reach up and over curved profiles, so it is larger than shingle flashing.
Lay the tile
Starting at the eave with a bird stop or eave closure, the roofer lays each course up the roof, fastening tile with nails, screws, clips or tile adhesive as the wind rules require. Small cut pieces at hips and valleys get extra attention.
Cap the ridge
Hips and ridges are capped, often with a mechanically fastened system that allows ridge ventilation. The roof is cleaned, broken pieces are replaced and spares are left with the owner.
What is included
A complete tile roof system
Ridge finish
The first course gets an eave closure and the ridge gets capped to complete the system.
Tile flashing
Wide valley metal and shaped wall flashings are installed which is where tile roofs usually leak.
Structural review
An engineer or span check confirms the structure and reinforced where needed.
Underlayment system
The deck is covered with underlayment suited to the slope lapped to shed water to the eaves.
Related service
Barrel Tile Roof Installation Garfield, NJ
Barrel tile is the classic two-piece tile roof: half-round pan tiles laid concave side up, with cover tiles laid over the joints between them. Their tapered shape and deep profile create the rolling texture that defines the style. Because of that depth, barrel tile needs careful work at the eaves, hips and ridges, where the open curves must be closed off.
On a Garfield barrel tile roof, the cover tiles are the ones wind targets, so how they are fastened matters most. A crew snaps lines so pans and covers stay straight from eave to ridge.
Related service
Spanish Tile Roof Installation Garfield, NJ
Most Spanish tile today is one-piece S tile, which mimics the classic two-piece look while going on faster. Both clay and concrete versions are made, in solid colors or blends from deep red to earth tones. Its interlocking side laps shed water well, but the curved ends at eaves and ridges still need closing off.
Spanish tile roof installation in Garfield follows the same system as any tile roof, from structure check to underlayment, flashing and tile. Where the tile meets walls and chimneys, flashing is shaped to fill the curve without leaving gaps. With a color blend, tile is drawn from several pallets as it goes up so no area looks patchy.
Local help
Tile Roof Installation Near Me
Tile roofs in Garfield go onto newer homes built for them and onto older homes where owners are switching from shingles. Homes in Garfield and surrounding areas such as Lodi, Elmwood Park, Wallington and Passaic that were framed for shingles often need a structural review before tile is an option, and storms that bring strong wind make fastening choices as important as the tile itself.
For tile roof installation in Garfield, NJ or nearby towns like Lodi, Elmwood Park, Wallington and Passaic, call (551) 348-2856 to reach a roofer who covers your street.
How the weather here affects roofs around Garfield
Winters here are long and cold, with snow on the roof for weeks at a time and plenty of nights below freezing. When warm attic air melts the snow, the meltwater runs down and freezes again at the eaves, building ice dams that push water up under the shingles. Coastal storms and heavy spring rain drive water sideways into flashing, valleys and old chimneys. That is why roof repair in Garfield is busiest after a hard winter and before the next one.
Why call
Why act early
Smaller repairs
A roof problem fixed early rarely spreads to the decking, the insulation or the ceilings.
Familiar with local homes
Local roofers see the same roofs and storm damage across Garfield and nearby towns.
Know what happens next
Ask the roofer about the cause, the options and the estimate before work starts.
Tile Roof Installation questions
Can tile go over old shingles?
Tile goes onto a clean deck, so the old roof comes off first. Tear-off exposes the decking so rotted boards can be replaced and the new underlayment can lap correctly.
How heavy is a tile roof?
Clay and concrete tile are among the heaviest roof coverings, several times the weight of shingles. Whether a given house can carry it depends on the framing, which is why conversions from shingles start with a structural review. Some lighter weight tile products are made for homes with less structural capacity.
How long does it take to put on a tile roof?
Expect more time than a shingle job, since each tile is placed and fastened by hand over more layers. Steep pitches, many hips and valleys and a structural upgrade all add time. Once the underlayment is down, the house is protected from rain while tile goes on.
What is better, clay or concrete tile?
The choice comes down to priorities. Clay tile resists fading and has lasted a century or more on some older buildings. Concrete offers a huge range of styles, but it is heavier than clay and fades as it ages.
Which underlayment is best for tile?
Tile roofs use heavy felt, synthetic underlayment or self-adhered membrane, sometimes in two layers. Since the tile can outlast the underlayment by decades, a longer lasting underlayment pays off. On slopes below 4 in 12, code requires two layers.
More questions? Call (551) 348-2856
Often needed together
Tile Roof Replacement
Replacing a worn tile roof, either by relaying the existing tile over new underlayment or by switching to new tile, so the layers under the tile last as long as the tile.
Learn moreRoof Installation
Putting on a new roof the way the material maker intends, with ventilation and flashing planned in from the start.
Learn moreTile Roof Inspection
Tile roof inspections that count broken and slipped tiles, check the layers beneath and estimate how much life is left, before buying a home, after a storm or as the underlayment ages.
Learn moreRoof Ventilation
Balancing attic intake and exhaust with soffit vents, ridge vents and attic fans, based on what the attic actually needs.
Learn more
Looking for something else?
See all roofing servicesTalk to a Garfield roofer about tile roof installation
Call (551) 348-2856 to talk to a roofer serving Garfield, NJ.