Deck repair
The base under the roof is made sound so fasteners hold.
Metal Roofing
Metal Roof Replacement Garfield, NJ
A Garfield roofer can tear off an old metal roof, re-cover it with new metal or replace a shingle roof with metal, after checking the framing and decking underneath. One call to (551) 348-2856 reaches a nearby roofer who replaces metal roofs.
The line between repair and replacement on metal is whether the panels are still sound. Widespread rust holes, a worn-out finish and hundreds of stripped fastener holes mean the metal has done its job. Older roofs made from thin, lightly coated steel tend to reach that point first.
Replacement can mean a full tear-off, a re-cover or panel by panel work. Tearing off lets the roofer see rotten purlins, soft decking and rusted fasteners before anything new is installed. In a retrofit, new panels go over the old roof on a framing system, avoiding tear-off on large or occupied buildings.
Many metal roof replacements are actually shingle roofs getting metal for the first time. Depending on code and deck condition, the old shingles are either removed or covered. Before calling, note the roof age, the type of panels or shingles on it and where it leaks.
Depending on what the roofer finds, metal roof replacement in Garfield, NJ can go hand in hand with metal roof installation and metal roof repair.
Dealing with this in Garfield, NJ right now? Call (551) 348-2856 to reach a nearby roofing contractor.
Call nowThe process
The metal roof replacement process
The order of work depends on tear-off or re-cover, but the basics are the same.
Inspect the structure
A full look at the panels, framing and attic shows whether the roof can be re-covered or must come off. This decides tear-off, re-cover or partial panel replacement.
Plan the new roof
The new system is selected, whether exposed fastener or standing seam, and the method of replacement is settled. Moving from purlins to standing seam often calls for a full deck.
Remove the old roof
Panels and trim come off section by section and go to a metal recycler. The roof is never left open overnight.
Restore the deck
Rotten purlins are replaced, loose ones refastened and soft decking cut out and renewed. Sound framing is what keeps the new roof fastened.
Install the new metal
New underlayment, eave trim, panels, ridge cap and flashing complete the replacement. Snow guards and ventilation are added where needed.
What is included
A complete metal replacement
Re-cover option
A retrofit re-cover avoids a tear-off on larger buildings.
Metal panels
Fresh metal cut to length for each slope is fastened to the manufacturer pattern.
Old roof removal
Old metal panels, trim and fasteners are removed and taken for recycling.
New trim
All new eave, rake, ridge and wall trim so the details last as long as the panels.
Related service
Metal Roof Panel Replacement Garfield, NJ
Metal roof panel replacement swaps out individual damaged panels instead of the whole roof. The damaged panel is unscrewed, the laps on either side are freed and a new panel of the same profile is lapped in and fastened. Standing seam panel swaps are possible but slower, since the seams on both sides have to be opened.
On a Garfield roof that is otherwise sound, a few new panels can add years of service. The new panels may look brighter until they weather. If many panels need swapping, a full replacement may make more sense.
Related service
Metal Roof Over Shingles Garfield, NJ
Metal over shingles is a common way to switch to metal without stripping the old roof. Where code permits, the roofer adds underlayment or furring strips over the shingles and fastens the metal through to the deck.
The tradeoff is that nobody sees the deck. Before going over shingles on a Garfield home, the deck is checked from inside and any soft areas are found. Any sign of rot, or a second layer of shingles, tips the decision to tear-off.
Local help
Metal Roof Replacement Near Me
Metal roof replacement in Garfield covers old barns and shops as well as homes trading shingles for metal. From Garfield out to neighboring towns such as Lodi, Elmwood Park, Wallington and Passaic, older metal roofs tend to need full replacement once the coating is gone, and newer houses are adding metal as their shingle roofs wear out, which is why the condition of the purlins and deck drives the plan.
Need metal roof replacement around Garfield? Call (551) 348-2856 for a Garfield roofer who serves the towns around it too.
How the weather here affects roofs around Garfield
Cold winters bring snow, ice and a long stretch of freezing nights. Heat escaping from the attic melts snow on the upper roof, and the water refreezes at the colder eaves, building ice dams that push water up under the shingles. Strong coastal storms push rain into every weak spot at the flashing and valleys. That is why roof repair in Garfield is busiest after a hard winter and before the next one.
Why call
Why fix it now
Drier ceilings
Small roof problems caught early usually stay small repairs.
Familiar with local homes
Local roofers see the same roofs and storm damage across Garfield and nearby towns.
Know what happens next
Ask your questions before you agree to anything.
Common questions about metal roof replacement
Can a new metal roof go over the old metal roof?
In a retrofit, new panels go over the old roof on spacers or purlins. It is common on larger buildings where tearing off would disrupt use. The framing must be sound enough to support both layers.
When does a metal roof need replacing instead of repair?
The answer depends on how much of the metal is still sound. Rust holes in many panels, a finish worn to bare metal and screw holes that will not hold new fasteners all point toward replacement. A roofer can tell you which sections can be saved after a look at the roof and the framing.
Can a metal roof be installed over shingles?
Where code permits, metal can go over a single layer of shingles. It saves tear-off and disposal, but it hides the deck, so the attic should be checked for rot and soft spots first. If the deck is questionable or there are two layers already, a tear-off is the better route.
Can I replace just one damaged metal panel?
Single panel replacement is common on exposed fastener roofs. A new panel of matching profile and gauge goes in with fresh sealant and screws. Standing seam panels take more work because the seams must be opened.
What happens to the old metal roofing?
Metal roofing is one of the most recyclable building materials. The old panels and trim are separated and sent to a recycler. Ask the roofer how disposal is handled before work starts.
More questions? Call (551) 348-2856
Other services that may help
Metal Roof Installation
Metal roof installation built around the right panel, finish and trim for the house, with high-temperature underlayment and proper flashing.
Learn moreMetal Roof Repair
Repairs for leaking fasteners, open seams, rusted panels and failed flashing on a metal roof, matched to exposed fastener and standing seam roofs alike.
Learn moreRoof Replacement
Replacing an aging roof with new underlayment, flashing, vents and roofing, built to current code from the decking out.
Learn moreStanding Seam Metal Roof
Long-lasting standing seam roofs, from snap-lock to mechanically seamed panels, built to let the metal move without leaking.
Learn more
Looking for something else?
See all roofing servicesTalk to a Garfield roofer about metal roof replacement
Call (551) 348-2856 for a local roofer in Garfield and nearby towns.